stm32/boards: Enable ROMFS partitions on PYBD_SFx boards.

Using unused and previously inaccessible external QSPI flash.

Signed-off-by: Damien George <damien@micropython.org>

Author: dpgeorge

ports/stm32/boards/PYBD_SF2/f722_qspi.ld

@@ -20,7 +20,8 @@ MEMORY
 {
     FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 512K
     FLASH_APP (rx)  : ORIGIN = 0x08008000, LENGTH = 480K    /* sectors 2-7 */
-    FLASH_EXT (rx)  : ORIGIN = 0x90000000, LENGTH = 2048K   /* external QSPI */
+    FLASH_EXT (rx)  : ORIGIN = 0x90000000, LENGTH = 1024K   /* external QSPI */
+    FLASH_ROMFS (rx): ORIGIN = 0x90100000, LENGTH = 1024K   /* external QSPI */
     RAM (rwx)       : ORIGIN = 0x20000000, LENGTH = 256K    /* DTCM+SRAM1+SRAM2 */
 }
 
@@ -39,6 +40,10 @@ _ram_end = ORIGIN(RAM) + LENGTH(RAM);
 _heap_start = _ebss; /* heap starts just after statically allocated memory */
 _heap_end = _sstack;
 
+/* ROMFS location */
+_micropy_hw_romfs_part1_start = ORIGIN(FLASH_ROMFS);
+_micropy_hw_romfs_part1_size = LENGTH(FLASH_ROMFS);
+
 /* Define output sections */
 SECTIONS
 {

ports/stm32/boards/PYBD_SF2/mpconfigboard.h

@@ -64,6 +64,11 @@ void board_sleep(int value);
 #define MICROPY_HW_RTC_USE_US       (1)
 #define MICROPY_HW_RTC_USE_CALOUT   (1)
 
+// ROMFS config
+#define MICROPY_HW_ROMFS_ENABLE_EXTERNAL_QSPI (1)
+#define MICROPY_HW_ROMFS_QSPI_SPIFLASH_OBJ (&spi_bdev2.spiflash)
+#define MICROPY_HW_ROMFS_ENABLE_PART1 (1)
+
 // SPI flash #1, for R/W storage
 #define MICROPY_HW_SOFTQSPI_SCK_LOW(self) (GPIOE->BSRR = (0x10000 << 11))
 #define MICROPY_HW_SOFTQSPI_SCK_HIGH(self) (GPIOE->BSRR = (1 << 11))

ports/stm32/boards/PYBD_SF6/f767.ld

@@ -18,7 +18,7 @@ MEMORY
 {
     FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 2048K
     FLASH_APP (rx)  : ORIGIN = 0x08008000, LENGTH = 2016K   /* sectors 1-11 3x32K 1*128K 7*256K */
-    FLASH_EXT (rx)  : ORIGIN = 0x90000000, LENGTH = 2048K   /* external QSPI */
+    FLASH_ROMFS (rx): ORIGIN = 0x90000000, LENGTH = 2048K   /* external QSPI */
     RAM (rwx)       : ORIGIN = 0x20000000, LENGTH = 512K    /* DTCM=128k, SRAM1=368K, SRAM2=16K */
 }
 
@@ -37,4 +37,8 @@ _ram_end = ORIGIN(RAM) + LENGTH(RAM);
 _heap_start = _ebss; /* heap starts just after statically allocated memory */
 _heap_end = _sstack;
 
+/* ROMFS location */
+_micropy_hw_romfs_part1_start = ORIGIN(FLASH_ROMFS);
+_micropy_hw_romfs_part1_size = LENGTH(FLASH_ROMFS);
+
 INCLUDE common_bl.ld

ports/stm32/boards/PYBD_SF6/mpconfigboard.h

@@ -45,6 +45,11 @@
 #define MICROPY_HW_CLK_PLLQ         (6)
 #define MICROPY_HW_FLASH_LATENCY    (FLASH_LATENCY_4)
 
+// ROMFS config
+#define MICROPY_HW_ROMFS_ENABLE_EXTERNAL_QSPI (1)
+#define MICROPY_HW_ROMFS_QSPI_SPIFLASH_OBJ (&spi_bdev2.spiflash)
+#define MICROPY_HW_ROMFS_ENABLE_PART1 (1)
+
 // Extra UART config
 #define MICROPY_HW_UART7_TX         (pyb_pin_W16)
 #define MICROPY_HW_UART7_RX         (pyb_pin_W22B)