Add files via upload

Author: CircuitART

_board/circuitart_esp32s3_zero.md

@@ -0,0 +1,47 @@
+---
+layout: download
+board_id: "CircuitArt_ESP32S3_Zero"
+title: "CircuitArt ESP32S3 Zero Download"
+name: "CircuitArt ESP32S3 Zero"
+manufacturer: "CircuitArt"
+board_url:
+ - "https://github.com/CircuitART/ESP32S3zero"
+board_image: "CircuitArt_ESP32S3_Zero.jpg"
+date_added: 2024-09-09
+family: esp32s3
+bootloader_id: circuitart_zero_s3
+downloads_display: true
+features:
+  - PI ZERO-Compatible
+  - Battery Charging
+  - Micro I2C connector
+  - Wi-Fi
+  - USB-C
+  - Display
+  - Camera
+  - SD Reader
+---
+
+A new ESP32S3 Dev board in a RaspberryPI zero footprint, The board has an additional tiny SPI/I2C connector for 1.3" IPS display + AHT20 sensor.
+
+Thats not all, This board comes with native USB, Debug USB and **16 MB Flash + 8 MB of PSRAM**, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi and Camera means it's awesome for IoT projects. And the PI ZERO footprint make the expandability super easy.
+
+**Features:**
+
+- **ESP32-S3 Dual Core 240MHz Tensilica processor** - the next generation of ESP32-Sx, with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
+- **huge data buffers** the board comes with 16 MByte of Flash and 8 MByte of PSRAM
+- **Color 1.3" IPS TFT** - bright and colorful display with ST7789 chipset that can be viewed at any angle angle.
+- **Power options** - USB type C **or** Lipoly battery
+- **Built-in battery charging** when powered over USB-C
+- **LiPoly battery monitor** - LC709203 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
+- **Reset and DFU** (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
+- **USB-c debug port** the board has CP2102 serial chip (optional, for checking the hardware serial debug console)
+- **Sicro I2C** connector for I2C devices, with switchable power, so you can go into low power mode.
+- **Charge & User** LEDs + status
+- **NeoPixel** 4 tiny neopixel led next to the camera so they  can act as cam light or flash.
+- **Low Power friendly**! In deep sleep mode, we can get down to 80~100uA of current draw from the battery
+- **Works with Arduino or CircuitPython**
+
+## Learn More
+
+* [GitHub](https://github.com/CircuitART/ESP32S3zero)