Change sme basic example.

The examples now uses the new function

Author: MiK

hardware/AMEL/samd/libraries/SME_basic/examples/blinkRGB/blinkRGB.ino

@@ -9,9 +9,9 @@
   int i = 0;
 
 void setup() {
-  LED_GREEN_INIT;
-  LED_BLUE_INIT;
-  LED_RED_INIT;
+
+  // LED & User Button are already initialized by the SME core.
+  // it is not required to do here
   pinMode(PIN_LED_RXL, OUTPUT);
   pinMode(PIN_LED_TXL, OUTPUT);
 
@@ -22,30 +22,32 @@ void loop() {;
   switch (i) {
     case 0:
       i++;
-      LED_GREEN_ON(HIGH);
+      ledGreenLight(HIGH);
       break;
 
     case 1:
       i++;
-      LED_RED_ON(HIGH);
+      ledRedLight(HIGH);
       break;
 
     case 2:
       i = 0;
-      LED_BLUE_ON(HIGH);
+      ledBlueLight(HIGH);
       break;
 
     default:
       break;
   }
+
   digitalWrite(PIN_LED_RXL, LOW);
   digitalWrite(PIN_LED_TXL, LOW);
   delay(100);
 
 
-  LED_GREEN_ON(LOW);
-  LED_BLUE_ON(LOW);
-  LED_RED_ON(LOW);
+  ledGreenLight(LOW);
+  ledBlueLight(LOW);
+  ledRedLight(LOW);
+
   digitalWrite(PIN_LED_RXL, HIGH);
   digitalWrite(PIN_LED_TXL, HIGH);
   delay(100);

hardware/AMEL/samd/libraries/SME_basic/examples/initializationResult/initializationResult.ino

@@ -8,6 +8,9 @@
 #include <Arduino.h>
 
 void setup() {
+    // LED & User Button are already initialized by the SME core.
+    // it is not required to do here
+
     SerialUSB.begin(115200);
 }
 
@@ -17,11 +20,12 @@ void loop() {
 
   if (smeInitError == 0){
     SerialUSB.println("SUCCEED !");
-    LED_GREEN_ON(HIGH);
+    ledGreenLight(HIGH);
   }    
   else {
+    //  ERROR !!!!!!! FLASH EVERYTHING
+
     SerialUSB.println("ERROR !");
-    //         // ERROR !!!!!!! FLASH EVERYTHING
 
         pinMode(PIN_LED_RXL, OUTPUT);
         pinMode(PIN_LED_TXL, OUTPUT);
@@ -31,17 +35,17 @@ void loop() {
             switch (i) {
                 case 0:
                 i++;
-                LED_GREEN_ON(HIGH);
+                ledGreenLight(HIGH);
                 break;
 
                 case 1:
                 i++;
-                LED_RED_ON(HIGH);
+                ledRedLight(HIGH);
                 break;
 
                 case 2:
                 i=0;
-                LED_BLUE_ON(HIGH);
+                ledBlueLight(HIGH);
                 break;
 
                 default:
@@ -52,9 +56,9 @@ void loop() {
             delay(100);
 
 
-            LED_GREEN_ON(LOW);
-            LED_BLUE_ON(LOW);
-            LED_RED_ON(LOW);
+            ledGreenLight(LOW);
+            ledBlueLight(LOW);
+            ledRedLight(LOW);
             digitalWrite(PIN_LED_RXL, HIGH);
             digitalWrite(PIN_LED_TXL, HIGH);
             delay(100);

hardware/AMEL/samd/libraries/SME_basic/examples/userButton/userButton.ino

@@ -15,22 +15,22 @@
 // the setup function runs once when you press reset or power the board
 void setup() {
 
-    // LED & User Button are already initilized by the SME core.
+    // LED & User Button are already initialized by the SME core.
     // it is not required to do here
 }
 
 // the loop function runs over and over again forever
 void loop() {
 
     if (button1IsPressed()) {
-        LED_BLUE_ON(HIGH);
+        ledBlueLight(HIGH);
     } else {
-        LED_BLUE_ON(LOW);
+        ledBlueLight(LOW);
     }
 
     if (button2IsPressed()) {
-        LED_RED_ON(HIGH);
+        ledRedLight(HIGH);
     } else {
-        LED_RED_ON(LOW);
+        ledRedLight(LOW);
     }
 }