Linter: Rules Updates [PC-914, MKC-11] (#660)

* Lint fix NXP® trademark

* Linter: Add NXP® rule

* Linter: USB-C trademark regex fix [PC-1014] (#632)

* Fix USB-C Regex

* Lint: USB-C trademark

* Lint: Tech-specs, datasheets and features

* Linter: Add Edge Impulse® trademark rule[PC-1037] (#657)

* Litner: Add Edge Impulse® rule

* Fix Edge Impulse®

* [PC-1054] Content System: Trademarks rule addition to Linter tool (#833)

* Initial Commit - Trademarks rule addition & update to linter tool (Adds Arduino Opta® & MIPI® / A-PHY® / CSI-2® / I3C® / M-PHY® rule)

* Trademarks rule RegEx updated (PCRE)

* Opta Trademark rule update

* Fix malformed URLs in sketch comments

* Update URLs with broken redirects

* Opta rule quick fix

---------

Co-authored-by: TaddyHC <k.hochung@arduino.cc>
Co-authored-by: per1234 <accounts@perglass.com>
Co-authored-by: Sebastian Romero <s.romero@arduino.cc>
Co-authored-by: marqdevx <p.marquinez@arduino.cc>

---------

Co-authored-by: TaddyHC <94547080+TaddyHC@users.noreply.github.com>
Co-authored-by: Sebastian Romero <s.romero@arduino.cc>
Co-authored-by: Arduino Bot <ArduinoBot@users.noreply.github.com>
Co-authored-by: TaddyHC <k.hochung@arduino.cc>
Co-authored-by: per1234 <accounts@perglass.com>

Author: 5 people

content/hardware/01.mkr/02.shields/mkr-can-shield/tech-specs.yml

@@ -6,7 +6,7 @@ Protocol: CAN bus
 Communication: SPI
 Integrated circuits:
   Controller: Microchip MCP2515
-  Transceiver: NXP TJA1049
+  Transceiver: NXP® TJA1049
   Buck converter: TPS54232
 Power:
   Operating voltage: 3.3V

content/hardware/02.hero/boards/uno-mini-le/datasheet/datasheet.md

@@ -115,7 +115,7 @@ The UNO Mini is a smaller version of the Arduino UNO - to celebrate a successful
 
 | Ref.  | Description                    | Ref.  | Description                           |
 | ----- | ------------------------------ | ----- | ------------------------------------- |
-| J1    | USB C Connector                | J7    | Ground                                |
+| J1    | USB C® Connector               | J7    | Ground                                |
 | J2    | 6x Connector pin (female)      | U1    | ATMEGA16U2 Module                     |
 | J3    | 8x Connector pin (female)      | U2    | ATMEGA328P Module                     |
 | J4    | 8x Connector pin (female)      | U5    | MPM3610AGQV-PIC StpDwn-CONV.21V 1.2A  |

content/hardware/02.hero/boards/uno-mini-le/tech-specs.yml

@@ -2,7 +2,7 @@ Board:
   Name: Arduino UNO Mini Limited Edition
   SKU: ABX00062
 Microcontroller: ATmega328P
-USB connector: USB-C
+USB connector: USB-C®
 Pins:
   Built-in LED Pin: 13
   Digital I/O Pins: 14

content/hardware/04.pro/boards/portenta-h7-lite-connected/tech-specs.yml

@@ -1,27 +1,27 @@
-Board:
-  Name: Arduino® Portenta H7 Lite Connected
-  SKU: ABX00046
-Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
-USB connector: USB-C
-Pins:
-  Digital I/O Pins: 22
-  Analog input pins: 8
-  PWM pins: 10
-Connectivity: Murata Type 1DX shielded ultra small Wi-Fi® 11b/g/n + Bluetooth® 5.1 module
-Secure element: ATECC608
-Communication:
-  UART: Yes
-  I2C: Yes
-  SPI: Yes
-Power:
-  Circuit operating voltage: 3.3V
-  Input voltage (VIN): 5V
-  DC Current per I/O Pin: 8 mA
-Clock speed:
-  Main core: 480 MHz
-  Second core: 240 MHz
-Memory:
-  ST STM32H747XI: 2MB Flash, 1MB RAM
-Dimensions:
-  Width: 25 mm
+Board:
+  Name: Arduino® Portenta H7 Lite Connected
+  SKU: ABX00046
+Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
+USB connector: USB-C®
+Pins:
+  Digital I/O Pins: 22
+  Analog input pins: 8
+  PWM pins: 10
+Connectivity: Murata Type 1DX shielded ultra small Wi-Fi® 11b/g/n + Bluetooth® 5.1 module
+Secure element: ATECC608
+Communication:
+  UART: Yes
+  I2C: Yes
+  SPI: Yes
+Power:
+  Circuit operating voltage: 3.3V
+  Input voltage (VIN): 5V
+  DC Current per I/O Pin: 8 mA
+Clock speed:
+  Main core: 480 MHz
+  Second core: 240 MHz
+Memory:
+  ST STM32H747XI: 2MB Flash, 1MB RAM
+Dimensions:
+  Width: 25 mm
   Length: 66 mm

content/hardware/04.pro/boards/portenta-h7-lite/tech-specs.yml

@@ -1,26 +1,26 @@
-Board:
-  Name: Arduino® Portenta H7 Lite
-  SKU: ABX00045
-Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
-USB connector: USB-C
-Pins:
-  Digital I/O Pins: 22
-  Analog input pins: 8
-  PWM pins: 10
-Secure element: ATECC608
-Communication:
-  UART: Yes
-  I2C: Yes
-  SPI: Yes
-Power:
-  Circuit operating voltage: 3.3V
-  Input voltage (VIN): 5V
-  DC Current per I/O Pin: 8 mA
-Clock speed:
-  Main core: 480 MHz
-  Second core: 240 MHz
-Memory:
-  ST STM32H747XI: 2MB Flash, 1MB RAM
-Dimensions:
-  Width: 25 mm
-  Length: 66 mm
+Board:
+  Name: Arduino® Portenta H7 Lite
+  SKU: ABX00045
+Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
+USB connector: USB-C®
+Pins:
+  Digital I/O Pins: 22
+  Analog input pins: 8
+  PWM pins: 10
+Secure element: ATECC608
+Communication:
+  UART: Yes
+  I2C: Yes
+  SPI: Yes
+Power:
+  Circuit operating voltage: 3.3V
+  Input voltage (VIN): 5V
+  DC Current per I/O Pin: 8 mA
+Clock speed:
+  Main core: 480 MHz
+  Second core: 240 MHz
+Memory:
+  ST STM32H747XI: 2MB Flash, 1MB RAM
+Dimensions:
+  Width: 25 mm
+  Length: 66 mm

content/hardware/04.pro/boards/portenta-h7/tech-specs.yml

@@ -1,27 +1,27 @@
-Board:
-  Name: Arduino® Portenta H7
-  SKU: ABX00042
-Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
-USB connector: USB-C
-Pins:
-  Digital I/O Pins: 22
-  Analog input pins: 8
-  PWM pins: 10
-Connectivity: Murata Type 1DX shielded ultra small Wi-Fi® 11b/g/n + Bluetooth® 5.1 module
-Secure element: NXP SE050C2 and ATECC608
-Communication:
-  UART: Yes
-  I2C: Yes
-  SPI: Yes
-Power:
-  Circuit operating voltage: 3.3V
-  Input voltage (VIN): 5V
-  DC Current per I/O Pin: 8 mA
-Clock speed:
-  Main core: 480 MHz
-  Second core: 240 MHz
-Memory:
-  ST STM32H747XI: 2MB Flash, 1MB RAM
-Dimensions:
-  Width: 25 mm
+Board:
+  Name: Arduino® Portenta H7
+  SKU: ABX00042
+Microcontroller: STM32H747XI dual Cortex®-M7+M4 32bit low power Arm® MCU
+USB connector: USB-C®
+Pins:
+  Digital I/O Pins: 22
+  Analog input pins: 8
+  PWM pins: 10
+Connectivity: Murata Type 1DX shielded ultra small Wi-Fi® 11b/g/n + Bluetooth® 5.1 module
+Secure element: NXP SE050C2 and ATECC608
+Communication:
+  UART: Yes
+  I2C: Yes
+  SPI: Yes
+Power:
+  Circuit operating voltage: 3.3V
+  Input voltage (VIN): 5V
+  DC Current per I/O Pin: 8 mA
+Clock speed:
+  Main core: 480 MHz
+  Second core: 240 MHz
+Memory:
+  ST STM32H747XI: 2MB Flash, 1MB RAM
+Dimensions:
+  Width: 25 mm
   Length: 66 mm

content/hardware/04.pro/boards/portenta-h7/tutorials/ble-connectivity/content.md

@@ -27,13 +27,13 @@ In this tutorial we will enable low energy Bluetooth® on the Portenta H7 to all
 
 ## Goals
 
--   Enabling Bluetooth® Low Energy connectivity on the Portenta H7.
--   Connecting the Portenta to an external Bluetooth® Low Energy Mobile Application (In this case [nRF Connect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) by Nordic Semiconductor).
+- Enabling Bluetooth® Low Energy connectivity on the Portenta H7.
+- Connecting the Portenta to an external Bluetooth® Low Energy Mobile Application (In this case [nRF Connect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) by Nordic Semiconductor).
 
 ### Required Hardware and Software
 
 - [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
-- USB C cable (either USB A to USB C or USB C to USB C)
+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
 - Arduino IDE 1.8.13+  or Arduino Pro IDE 0.0.4+ 
 - Mobile device, phone or tablet
 - [nRFconnect](https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Connect-for-mobile) or equivalent tool downloaded on your mobile device: [nRF Connect for iOS](https://itunes.apple.com/us/app/nrf-connect/id1054362403?ls=1&mt=8) or [nRF Connect for android](https://play.google.com/store/apps/details?id=no.nordicsemi.android.mcp)

content/hardware/04.pro/boards/portenta-h7/tutorials/dual-core-processing/content.md

@@ -32,7 +32,7 @@ The Portenta H7 is equipped with a processor that has two processing units calle
 ### Required Hardware and Software
 
 - [Portenta H7 (ABX00042)](https://store.arduino.cc/portenta-h7) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
-- USB C cable (either USB A to USB C or USB C to USB C)
+- USB-C® cable (either USB A to USB-C® or USB-C® to USB-C®)
 - Arduino IDE 1.8.10+ 
 
 ## Cortex® M7 & M4 

content/hardware/04.pro/boards/portenta-h7/tutorials/flash-optimized-key-value-store/content.md

@@ -29,7 +29,7 @@ In this tutorial you will learn how to use the Mbed OS [TDBStore API](https://os
 ### Required Hardware and Software
 
 - [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7),  [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
-- USB C cable (either USB A to USB C or USB C to USB C)
+- USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
 - Arduino IDE 1.8.10+ or Arduino Pro IDE 0.0.4+ or Arduino CLI 0.13.0+
 
 ## Instructions

content/hardware/04.pro/boards/portenta-h7/tutorials/lauterbach-debugger/content.md

@@ -26,7 +26,7 @@ This tutorial will show you how to use the Lauterbach TRACE32 GDB front-end debu
 
 ### Required Hardware and Software
 - [Portenta H7 (ABX00042)](https://store.arduino.cc/products/portenta-h7), [Portenta H7 Lite (ABX00045)](https://store.arduino.cc/products/portenta-h7-lite) or [Portenta H7 Lite Connected (ABX00046)](https://store.arduino.cc/products/portenta-h7-lite-connected)
--  USB C cable (either USB A to USB C or USB C to USB C)
+-  USB-C® cable (either USB-A to USB-C® or USB-C® to USB-C®)
 -  Arduino IDE 1.8.13+ or Arduino Pro IDE 0.1.0+
 -  Lauterbach TRACE32 (https://www.lauterbach.com/download_demo.html)