Merge: USB/TBT code rebase of supported drivers to upstream v6.14

MR: https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-10/-/merge_requests/864

JIRA: https://issues.redhat.com/browse/RHEL-78931

This MR rebases supported USB/TBT drivers to upstream kernel v6.14. By design, rebase changes are limited to supported USB/TBT drivers and rele- vant physical infrastructure. Changes which happen to touch the drivers but are tree-wide are selectively or partially pulled in when necessary.

1) Common Vulnerabilities and Exposures:

```
CVE: CVE-2024-58079
CVE: CVE-2024-57980
CVE: CVE-2024-58002
CVE: CVE-2025-21776
CVE: CVE-2025-21704
CVE: CVE-2025-21838
CVE: CVE-2025-21916
CVE: CVE-2025-21918
```

2) Addition/Removal of code:

This adds CONFIG_TYPEC_TBT_ALTMODE as a module in order to support Thunderbolt3 hardware that uses alternate mode. Moreover, this adds a a modpost series due to a fix that changed typec code to only use SVID for matching altmodes; as well as a debugfs series to properly declare and support the 'debugfs_get_aux()' function used here by xhci-debugfs code.

3) Omitted fixes:

```
Omitted-fix: 8a040e1 ("Revert "phy: qcom-qusb2: add QUSB2 support for IPQ5424"")
Omitted-fix: 25c36b5 ("phy: qcom-qusb2: reuse the IPQ6018 settings for IPQ5424")
```

Signed-off-by: Desnes Nunes <desnesn@redhat.com>

Approved-by: José Ignacio Tornos Martínez <jtornosm@redhat.com>
Approved-by: Eric Chanudet <echanude@redhat.com>
Approved-by: CKI KWF Bot <cki-ci-bot+kwf-gitlab-com@redhat.com>

Merged-by: CKI GitLab Kmaint Pipeline Bot <26919896-cki-kmaint-pipeline-bot@users.noreply.gitlab.com>

Author: CKI KWF Bot

.mailmap

@@ -37,6 +37,7 @@ Alexei Avshalom Lazar <quic_ailizaro@quicinc.com> <ailizaro@codeaurora.org>
 Alexei Starovoitov <ast@kernel.org> <alexei.starovoitov@gmail.com>
 Alexei Starovoitov <ast@kernel.org> <ast@fb.com>
 Alexei Starovoitov <ast@kernel.org> <ast@plumgrid.com>
+Alexey Klimov <alexey.klimov@linaro.org> <klimov.linux@gmail.com>
 Alexey Makhalov <alexey.amakhalov@broadcom.com> <amakhalov@vmware.com>
 Alex Elder <elder@kernel.org>
 Alex Elder <elder@kernel.org> <aelder@sgi.com>

Documentation/admin-guide/media/building.rst

@@ -15,7 +15,7 @@ Please notice, however, that, if:
 
 you should use the main media development tree ``master`` branch:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 In this case, you may find some useful information at the
 `LinuxTv wiki pages <https://linuxtv.org/wiki>`_:

Documentation/admin-guide/media/saa7134.rst

@@ -67,7 +67,7 @@ Changes / Fixes
 Please mail to linux-media AT vger.kernel.org unified diffs against
 the linux media git tree:
 
-    https://git.linuxtv.org/media_tree.git/
+    https://git.linuxtv.org/media.git/
 
 This is done by committing a patch at a clone of the git tree and
 submitting the patch using ``git send-email``. Don't forget to

Documentation/devicetree/bindings/connector/usb-connector.yaml

@@ -293,6 +293,13 @@ properties:
       PD negotiation till BC1.2 detection completes.
     default: 0
 
+  pd-revision:
+    description: Specifies the maximum USB PD revision and version supported by
+      the connector. This property is specified in the following order;
+      <revision_major, revision_minor, version_major, version_minor>.
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    maxItems: 4
+
 dependencies:
   sink-vdos-v1: [ sink-vdos ]
   sink-vdos: [ sink-vdos-v1 ]

Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml

@@ -18,6 +18,7 @@ properties:
     oneOf:
       - items:
           - enum:
+              - qcom,ipq5424-qusb2-phy
               - qcom,ipq6018-qusb2-phy
               - qcom,ipq8074-qusb2-phy
               - qcom,ipq9574-qusb2-phy

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml

@@ -16,8 +16,10 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,qcs615-qmp-gen3x1-pcie-phy
       - qcom,sa8775p-qmp-gen4x2-pcie-phy
       - qcom,sa8775p-qmp-gen4x4-pcie-phy
+      - qcom,sar2130p-qmp-gen3x2-pcie-phy
       - qcom,sc8180x-qmp-pcie-phy
       - qcom,sc8280xp-qmp-gen3x1-pcie-phy
       - qcom,sc8280xp-qmp-gen3x2-pcie-phy
@@ -138,6 +140,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sar2130p-qmp-gen3x2-pcie-phy
               - qcom,sc8180x-qmp-pcie-phy
               - qcom,sdm845-qhp-pcie-phy
               - qcom,sdm845-qmp-pcie-phy
@@ -166,6 +169,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,qcs615-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x1-pcie-phy
               - qcom,sc8280xp-qmp-gen3x2-pcie-phy
               - qcom,sc8280xp-qmp-gen3x4-pcie-phy

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb3-uni-phy.yaml

@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,ipq5424-qmp-usb3-phy
       - qcom,ipq6018-qmp-usb3-phy
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,ipq9574-qmp-usb3-phy
@@ -89,6 +90,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,ipq5424-qmp-usb3-phy
               - qcom,ipq6018-qmp-usb3-phy
               - qcom,ipq8074-qmp-usb3-phy
               - qcom,ipq9574-qmp-usb3-phy

Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml

@@ -16,6 +16,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sar2130p-qmp-usb3-dp-phy
       - qcom,sc7180-qmp-usb3-dp-phy
       - qcom,sc7280-qmp-usb3-dp-phy
       - qcom,sc8180x-qmp-usb3-dp-phy
@@ -127,6 +128,7 @@ allOf:
       properties:
         compatible:
           enum:
+            - qcom,sar2130p-qmp-usb3-dp-phy
             - qcom,sc8280xp-qmp-usb43dp-phy
             - qcom,sm6350-qmp-usb3-dp-phy
             - qcom,sm8550-qmp-usb3-dp-phy

Documentation/devicetree/bindings/usb/aspeed,usb-vhub.yaml

@@ -113,27 +113,27 @@ examples:
   - |
     #include <dt-bindings/clock/aspeed-clock.h>
     vhub: usb-vhub@1e6a0000 {
-            compatible = "aspeed,ast2500-usb-vhub";
-            reg = <0x1e6a0000 0x300>;
-            interrupts = <5>;
-            clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
-            aspeed,vhub-downstream-ports = <5>;
-            aspeed,vhub-generic-endpoints = <15>;
-            pinctrl-names = "default";
-            pinctrl-0 = <&pinctrl_usb2ad_default>;
-
-            vhub-vendor-id = <0x1d6b>;
-            vhub-product-id = <0x0107>;
-            vhub-device-revision = <0x0100>;
-            vhub-strings {
-                #address-cells = <1>;
-                #size-cells = <0>;
-
-                string@409 {
-                        reg = <0x409>;
-                        manufacturer = "ASPEED";
-                        product = "USB Virtual Hub";
-                        serial-number = "0000";
-                };
+        compatible = "aspeed,ast2500-usb-vhub";
+        reg = <0x1e6a0000 0x300>;
+        interrupts = <5>;
+        clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
+        aspeed,vhub-downstream-ports = <5>;
+        aspeed,vhub-generic-endpoints = <15>;
+        pinctrl-names = "default";
+        pinctrl-0 = <&pinctrl_usb2ad_default>;
+
+        vhub-vendor-id = <0x1d6b>;
+        vhub-product-id = <0x0107>;
+        vhub-device-revision = <0x0100>;
+        vhub-strings {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            string@409 {
+                reg = <0x409>;
+                manufacturer = "ASPEED";
+                product = "USB Virtual Hub";
+                serial-number = "0000";
             };
+        };
     };

Documentation/devicetree/bindings/usb/brcm,bdc.yaml

@@ -41,10 +41,10 @@ additionalProperties: false
 
 examples:
   - |
-        usb@f0b02000 {
-                compatible = "brcm,bdc-udc-v2";
-                reg = <0xf0b02000 0xfc4>;
-                interrupts = <0x0 0x60 0x0>;
-                phys = <&usbphy_0 0x0>;
-                clocks = <&sw_usbd>;
-        };
+    usb@f0b02000 {
+        compatible = "brcm,bdc-udc-v2";
+        reg = <0xf0b02000 0xfc4>;
+        interrupts = <0x0 0x60 0x0>;
+        phys = <&usbphy_0 0x0>;
+        clocks = <&sw_usbd>;
+    };