Seems timer no longer works

[berbergh]

I started the upyeasy board today, but there only seems to be a sensor update when I refresh the devices page.
Also, no data is written to the Domoticz

[Lisa999]

Can i have the log please?

[berbergh]

`ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT)
flash read err, 1000
ets_main.c 371
ets Jun 8 2016 00:22:57

rst:0x10 (RTCWDT_RTC_RESET),boot:0x3f (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:4364
load:0x40078000,len:0
load:0x40078000,len:10992
entry 0x4007a6c4
I (442) cpu_start: Pro cpu up.
I (442) cpu_start: Single core mode
I (442) heap_init: Initializing. RAM available for dynamic allocation:
I (446) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (452) heap_init: At 3FFDCDD0 len 00003230 (12 KiB): DRAM
I (458) heap_init: At 3FFE0440 len 00003BC0 (14 KiB): D/IRAM
I (464) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (471) heap_init: At 4009005C len 0000FFA4 (63 KiB): IRAM
I (477) cpu_start: Pro cpu start user code
I (47) cpu_start: Starting scheduler on PRO CPU.
I (355) modsocket: Initializing
loaded sink log
loaded sink console
loaded sink syslog
2000-01-01T00:00:00.005 [debug] uPyEasy: Init: Init constructor
2000-01-01T00:00:00.005 [debug] uPyEasy: Init: Entering init
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory config
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory config exception: OSError(17,)
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory plugins
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory plugins exception: OSError(17,)
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory protocols
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory protocols exception: OSError(17,)
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory scripts
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory scripts exception: OSError(17,)
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory rules
2000-01-01 00:00:00 [debug] uPyEasy: Init: Create directory rules exception: OSError(17,)
2000-01-01 00:00:00 [debug] uPyEasy: Init: config Table
2000-01-01 00:00:00 [debug] uPyEasy: Init: network Table
2000-01-01 00:00:00 [debug] uPyEasy: Init: protocol Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: controller Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: hardware Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: dxpin Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: dxmap Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: plugin Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: pluginstore Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: device Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: service Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: notification Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: advanced Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: script Table
2000-01-01 00:00:01 [debug] uPyEasy: Init: rule Table
2000-01-01 00:00:02 [debug] uPyEasy: Hal: Init
2000-01-01 00:00:02 [debug] uPyEasy: Hal: init, network record present
2000-01-01 00:00:02 [debug] uPyEasy: Hal: esp32
I (2585) wifi: wifi firmware version: 111e74d
I (2585) wifi: config NVS flash: enabled
I (2585) wifi: config nano formating: disabled
I (2585) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (2595) system_api: Base MAC address is not set, read default base MAC address from BLK0 of EFUSE
I (2615) wifi: Init dynamic tx buffer num: 32
I (2615) wifi: Init data frame dynamic rx buffer num: 64
I (2615) wifi: Init management frame dynamic rx buffer num: 64
I (2625) wifi: wifi driver task: 3ffe3144, prio:23, stack:4096
I (2625) wifi: Init static rx buffer num: 10
I (2635) wifi: Init dynamic rx buffer num: 0
I (2635) wifi: Init rx ampdu len mblock:7
I (2635) wifi: Init lldesc rx ampdu entry mblock:4
I (2645) wifi: wifi power manager task: 0x3ffe9940 prio: 21 stack: 2560
I (2665) phy: phy_version: 362.0, 61e8d92, Sep 8 2017, 18:48:11, 0, 0
I (2665) wifi: mode : null
I (2665) wifi: mode : sta (30:ae:a4:22:e8:1c)
I (2665) wifi: STA_START
I (3515) wifi: n:7 1, o:1 0, ap:255 255, sta:7 1, prof:1
I (4075) wifi: state: init -> auth (b0)
I (4085) wifi: state: auth -> assoc (0)
I (4085) wifi: state: assoc -> run (10)
I (4105) wifi: connected with , channel 7
I (4105) network: event 4
I (4865) event: sta ip: , mask: 255.255.255.0, gw:
I (4865) network: GOT_IP
2000-01-01 00:00:04 [debug] uPyEasy: Hal: esp32, ip:
2000-01-01 00:00:04 [debug] uPyEasy: Hal: nic present
2000-01-01 00:00:04 [debug] uPyEasy: Protocols: Load
2000-01-01 00:00:04 [debug] uPyEasy: Protocols: Init protocol records
2000-01-01 00:00:05 [debug] uPyEasy: Protocols: Load protocol domoticz_mqtt
2000-01-01 00:00:05 [debug] uPyEasy: Protocols: Create protocol Record: domoticz_mqtt
2000-01-01 00:00:05 [debug] uPyEasy: Protocols: Load protocol domoticz_http
2000-01-01 00:00:05 [debug] uPyEasy: Protocols: Create protocol Record: domoticz_http
2000-01-01 00:00:06 [debug] uPyEasy: Protocols: Init protocol records, run async loop
2000-01-01 00:00:06 [debug] uPyEasy: Protocols: Init controller -Domoticz HTTP-1
2000-01-01 00:00:06 [debug] uPyEasy: Protocol: domoticz http contruction
2000-01-01 00:00:06 [debug] uPyEasy: Utils: uPyEasy Name
2000-01-01 00:00:06 [debug] uPyEasy: Protocol Domoticz HTTP: Init
2000-01-01 00:00:06 [debug] uPyEasy: Plugins: Load
2000-01-01 00:00:06 [debug] uPyEasy: Plugins: init plugin records
I (7085) wifi: pm start, type:0

2000-01-01 00:00:07 [debug] uPyEasy: Plugins: Register frozen plugin switch
2000-01-01 00:00:07 [debug] uPyEasy: Plugin: switch contruction
2000-01-01 00:00:08 [debug] uPyEasy: Plugins: Create frozen plugin Record: switch
2000-01-01 00:00:08 [debug] uPyEasy: Plugins: Register frozen plugin bme280
2000-01-01 00:00:08 [debug] uPyEasy: Plugins: Create frozen plugin Record: bme280
2000-01-01 00:00:08 [debug] uPyEasy: Plugins: Register frozen plugin test
2000-01-01 00:00:08 [debug] uPyEasy: Plugins: Create frozen plugin Record: test
2000-01-01 00:00:09 [debug] uPyEasy: Plugins: Register frozen plugin ds18
2000-01-01 00:00:09 [debug] uPyEasy: Plugin: ds18 contruction
2000-01-01 00:00:09 [debug] uPyEasy: Plugins: Create frozen plugin Record: ds18
2000-01-01 00:00:09 [debug] uPyEasy: Plugins: Init plugin records, run async loop
2000-01-01 00:00:10 [debug] uPyEasy: Plugins: Init device: Test with plugin: 3
2000-01-01 00:00:10 [debug] uPyEasy: Plugin: test contruction
2000-01-01 00:00:10 [debug] uPyEasy: Plugins: Init device: Test ,instantiate plugin: Test
2000-01-01 00:00:10 [debug] uPyEasy: Utils: uPyEasy Name
2000-01-01 00:00:10 [debug] uPyEasy: Plugin: test init
2000-01-01 00:00:10 [debug] uPyEasy: Plugins: Read device store: Test
2000-01-01 00:00:11 [debug] uPyEasy: Plugins: Init device: DS1 with plugin: 4
2000-01-01 00:00:11 [debug] uPyEasy: Protocols: GetQueue controller -Domoticz HTTP-1
2000-01-01 00:00:11 [debug] uPyEasy: Plugin: ds18 contruction
2000-01-01 00:00:11 [debug] uPyEasy: Plugin: ds18 contruction
2000-01-01 00:00:11 [debug] uPyEasy: Plugins: Init device: DS1 ,instantiate plugin: DS18B20
2000-01-01 00:00:11 [debug] uPyEasy: Utils: uPyEasy Name
2000-01-01 00:00:11 [debug] uPyEasy: Plugin: ds18 init
2000-01-01 00:00:11 [debug] uPyEasy: Plugins: Read device store: DS1
2000-01-01 00:00:11 [debug] uPyEasy: Plugin: ds18 init, pin used: d13
2000-01-01 00:00:12 [debug] uPyEasy: Hal: pin = d13
2000-01-01 00:00:12 [debug] uPyEasy: Hal: pin esp32: 13
2000-01-01 00:00:12 [debug] uPyEasy: Plugins: Init device: BME280 with plugin: 2
2000-01-01 00:00:12 [debug] uPyEasy: Protocols: GetQueue controller -Domoticz HTTP-1
2000-01-01 00:00:12 [debug] uPyEasy: Plugin: bme280 contruction
2000-01-01 00:00:12 [debug] uPyEasy: Plugins: Init device: BME280 ,instantiate plugin: BME280
2000-01-01 00:00:12 [debug] uPyEasy: Utils: uPyEasy Name
2000-01-01 00:00:12 [debug] uPyEasy: Plugin: bme280 init
2000-01-01 00:00:13 [debug] uPyEasy: Plugins: Read device store: BME280
2000-01-01 00:00:13 [debug] uPyEasy: Hal: get i2c
2000-01-01 00:00:13 [debug] uPyEasy: Hal: get i2c esp32
2000-01-01 00:00:13 [debug] uPyEasy: Hal: get i2c esp32, create i2c object with id: 1
2000-01-01 00:00:13 [debug] uPyEasy: Hal: pin = d4
2000-01-01 00:00:13 [debug] uPyEasy: Hal: pin esp32: 4
2000-01-01 00:00:13 [debug] uPyEasy: Hal: pin = d5
2000-01-01 00:00:13 [debug] uPyEasy: Hal: pin esp32: 5
2000-01-01 00:00:13 [debug] uPyEasy: Scripts: Load
2000-01-01 00:00:13 [debug] uPyEasy: Scripts: Init
2000-01-01 00:00:13 [debug] uPyEasy: Plugins: GetQueue
2000-01-01 00:00:13 [debug] uPyEasy: Scripts: init scripts records
2000-01-01 00:00:14 [debug] uPyEasy: Scripts: init rules records
2000-01-01 00:00:14 [debug] uPyEasy: Scripts: Init script/rule records, run async loop
2000-01-01 00:00:14 [debug] uPyEasy: Utils: Sys hostname
2000-01-01 00:00:14 [debug] uPyEasy: Utils: uPyEasy Name
Set syslog hostname 0.0.0.0
reloaded sink syslog
2000-01-01 00:00:14 [debug] uPyEasy-uPyEasy: Hal: Entering SetTime
2000-01-01 00:00:14 [debug] uPyEasy-uPyEasy: Hal: Entering GetNtpTime
2000-01-01 00:00:14 [debug] uPyEasy-uPyEasy: Hal: network Table
2000-01-01 00:00:14 [debug] uPyEasy-uPyEasy: Hal: Using NTP Hostname: pool.ntp.org
2000-01-01 00:00:14 [debug] uPyEasy-uPyEasy: Hal: TimeZome offset: 60
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Received UTC NTP Time: 570813825
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Timezone corrected NTP Time: 570817425
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: DST corrected NTP Time: 570817425
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Received NTP Time: 570817425
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: StartTime: 570817425
2018-02-01 16:23:45 [debug] uPyEasy-uPyEasy: Set time: 2018-02-01T16:23:45
2018-02-01 16:23:45 [debug] uPyEasy-uPyEasy: Main: Pre-loading home page
2018-02-01 16:23:45 [debug] uPyEasy-uPyEasy: Hal: get_ip_address esp32, ip:
2018-02-01 16:23:45 [debug] uPyEasy-uPyEasy: Main: uPyEasy Main Async Loop

• Running on http://:80/
  stack: 2000 out of 15360
  GC: total: 96000, used: 68912, free: 27088
  No. of 1-blocks: 1097, 2-blocks: 140, max blk sz: 901, max free sz: 1034
  570817422.866 <HTTPRequest object at 3ffb9d50> <StreamWriter > "GET /devices"
  2018-02-01 16:23:46 [debug] uPyEasy-uPyEasy: Pages: Authorize User!?
  2018-02-01 16:23:46 [debug] uPyEasy-uPyEasy: Pages: Entering Devices Page
  2018-02-01 16:23:46 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name
  2018-02-01 16:23:47 [debug] uPyEasy-uPyEasy: Plugins: Read device Test
  2018-02-01 16:23:47 [debug] uPyEasy-uPyEasy: Plugin: test read
  2018-02-01 16:23:47 [debug] uPyEasy-uPyEasy: Plugins: Read device DS1
  2018-02-01 16:23:47 [debug] uPyEasy-uPyEasy: Plugin: ds18 read
  2018-02-01 16:23:48 [debug] uPyEasy-uPyEasy: Plugins: Read device BME280
  2018-02-01 16:23:48 [debug] uPyEasy-uPyEasy: Plugin: bme280 read
  stack: 2000 out of 15360
  GC: total: 96000, used: 88144, free: 7856
  No. of 1-blocks: 1257, 2-blocks: 159, max blk sz: 901, max free sz: 392
  570817422.866 <HTTPRequest object at 3ffc38d0> <StreamWriter > "GET /static/upyeasy.css"
  stack: 2000 out of 15360
  GC: total: 96000, used: 89696, free: 6304
  No. of 1-blocks: 1302, 2-blocks: 166, max blk sz: 901, max free sz: 365
  570817422.866 <HTTPRequest object at 3ffc6750> <StreamWriter > "GET /static/upyeasy.js"
  static/upyeasy.css
  static/upyeasy.js
  `
  That's it.

After a page refresh:

stack: 2000 out of 15360 GC: total: 96000, used: 68992, free: 27008 No. of 1-blocks: 1097, 2-blocks: 140, max blk sz: 901, max free sz: 875 570817852.020 <HTTPRequest object at 3ffb9b40> <StreamWriter <socket>> "GET /devices" 2018-02-01 16:31:07 [debug] uPyEasy-uPyEasy: Pages: Authorize User!? 2018-02-01 16:31:07 [debug] uPyEasy-uPyEasy: Pages: Entering Devices Page 2018-02-01 16:31:08 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name 2018-02-01 16:31:08 [debug] uPyEasy-uPyEasy: Plugins: Read device Test 2018-02-01 16:31:08 [debug] uPyEasy-uPyEasy: Plugin: test read 2018-02-01 16:31:08 [debug] uPyEasy-uPyEasy: Plugins: Read device DS1 2018-02-01 16:31:08 [debug] uPyEasy-uPyEasy: Plugin: ds18 read 2018-02-01 16:31:09 [debug] uPyEasy-uPyEasy: Plugins: Read device BME280 2018-02-01 16:31:09 [debug] uPyEasy-uPyEasy: Plugin: bme280 read stack: 2000 out of 15360 GC: total: 96000, used: 88128, free: 7872 No. of 1-blocks: 1257, 2-blocks: 159, max blk sz: 901, max free sz: 392 570817852.020 <HTTPRequest object at 3ffc3d00> <StreamWriter <socket>> "GET /static/upyeasy.css" stack: 2000 out of 15360 GC: total: 96000, used: 89680, free: 6320 No. of 1-blocks: 1302, 2-blocks: 166, max blk sz: 901, max free sz: 369 570817852.020 <HTTPRequest object at 3ffc70a0> <StreamWriter <socket>> "GET /static/upyeasy.js" static/upyeasy.css static/upyeasy.js

[berbergh]

Seems upyeasy at least sends some info to Domoticz.
This is what I see in the Domoticz log:

2018-02-03 15:55:57.297 (RFLink2) Temp (OregonV1)
2018-02-03 15:56:00.107 Error: EventSystem: TEMP_HUM_BARO missing values : ID=351, sValue=19.6646.71875;0;1017.268;0
2018-02-03 15:56:00.125 Error: EventSystem: TEMP_HUM_BARO missing values : ID=351, sValue=19.6646.71875;0;1017.268;0

Nothing about the DS device in the log.

[Lisa999]

You're sending the BME280 values to domoticz? What's the config for the device & controller?

[berbergh]

In the hardware section of Domoticz, it is created as a dummy device, with TEMP+HUM+BARO settings.
This is what I see in the upyeasy log:
2018-02-18 18:26:16 [debug] uPyEasy-uPyEasy: Hal: get_ip_address esp32, ip: 192.168.0.119
2018-02-18 18:26:16 [debug] uPyEasy-uPyEasy: Pages: Home Page Data collected
2018-02-18 18:26:19 [debug] uPyEasy-uPyEasy: Pages: Authorize User!?
2018-02-18 18:26:19 [debug] uPyEasy-uPyEasy: Pages: Entering Devices Page
2018-02-18 18:26:19 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name
2018-02-18 18:26:20 [debug] uPyEasy-uPyEasy: Plugins: Read device Test
2018-02-18 18:26:20 [debug] uPyEasy-uPyEasy: Plugin: test read
2018-02-18 18:26:20 [debug] uPyEasy-uPyEasy: Plugins: Read device DS1
2018-02-18 18:26:20 [debug] uPyEasy-uPyEasy: Plugin: ds18 read
2018-02-18 18:26:21 [debug] uPyEasy-uPyEasy: Plugins: Read device BME280
2018-02-18 18:26:21 [debug] uPyEasy-uPyEasy: Plugin: bme280 read
2018-02-18 18:26:37 [debug] uPyEasy-uPyEasy: Pages: Authorize User!?
2018-02-18 18:26:37 [debug] uPyEasy-uPyEasy: Pages: Entering Advanced Page
2018-02-18 18:26:37 [debug] uPyEasy-uPyEasy: Pages: Display Advanced Page
2018-02-18 18:26:37 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name
2018-02-18 18:26:39 [debug] uPyEasy-uPyEasy: Pages: Authorize User!?
2018-02-18 18:26:39 [debug] uPyEasy-uPyEasy: Pages: Entering Tools Page
2018-02-18 18:26:39 [debug] uPyEasy-uPyEasy:
2018-02-18 18:26:39 [debug] uPyEasy-uPyEasy: Pages: Display Tools Page
2018-02-18 18:26:39 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: Pages: Authorize User!?
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: Pages: Entering Tools Page
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: ucmd
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: Pages: cmd: log
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: Pages: Log command given
2018-02-18 18:26:44 [debug] uPyEasy-uPyEasy: Utils: uPyEasy Name

[berbergh]

I started the upyeasy today. After:

2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Received UTC NTP Time: 572290389
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Timezone corrected NTP Time: 572293989
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: DST corrected NTP Time: 572293989
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: Received NTP Time: 572293989
2000-01-01 00:00:15 [debug] uPyEasy-uPyEasy: Hal: StartTime: 572293989
2018-02-18 18:33:09 [debug] uPyEasy-uPyEasy: Set time: 2018-02-18T18:33:09
2018-02-18 18:33:09 [debug] uPyEasy-uPyEasy: Main: Pre-loading home page
2018-02-18 18:33:09 [debug] uPyEasy-uPyEasy: Hal: get_ip_address esp32, ip: xxx.xxx.xxx.xxx
2018-02-18 18:33:09 [debug] uPyEasy-uPyEasy: Main: uPyEasy Main Async Loop

• Running on http://xxx.xxx.xxx.xxx:80/

Nothing happens, until I walk through the menu items of the upyeasy.

[Lisa999]

What's the config of the device and controller in uPyEasy?

[berbergh]

See picture for the setup.
What is more important, all for sudden, it started working again.
Looks like it lost connection ...

I (1417784) wifi: n:7 0, o:7 1, ap:255 255, sta:7 0, prof:1
I (1418804) wifi: n:7 1, o:7 0, ap:255 255, sta:7 1, prof:1
I (6075594) wifi: bcn_timout,ap_probe_send_start
I (6113174) wifi: bcn_timout,ap_probe_send_start
I (6115674) wifi: ap_probe_send over, resett wifi status to disassoc
I (6115674) wifi: state: run -> init (1)
I (6115674) wifi: n:7 0, o:7 1, ap:255 255, sta:7 1, prof:1
I (6115674) wifi: pm stop, total sleep time: 0/1813623494

I (6115684) wifi: STA_DISCONNECTED, reason:200
beacon timeout
I (6118094) wifi: STA_DISCONNECTED, reason:201
no AP found
I (6120504) wifi: STA_DISCONNECTED, reason:201
no AP found
I (6122914) wifi: STA_DISCONNECTED, reason:201
no AP found
I (6125324) wifi: STA_DISCONNECTED, reason:201
no AP found
I (6127734) wifi: STA_DISCONNECTED, reason:201
no AP found
I (6127854) wifi: n:7 1, o:7 0, ap:255 255, sta:7 1, prof:1
I (6127854) wifi: state: init -> auth (b0)
I (6127854) wifi: state: auth -> assoc (0)
I (6127864) wifi: state: assoc -> run (10)
I (6127874) wifi: connected with xxxxxx, channel 7
I (6127884) network: event 4
I (6128574) event: sta ip: xxx.xxx.xxx.xxx, mask: 255.255.255.0, gw: xxx.xxx.xxx.xxx
I (6128574) network: GOT_IP
I (6130864) wifi: pm start, type:0

2018-02-18 21:26:39 [debug] uPyEasy-uPyEasy: Protocols: Async processing protocols
2018-02-18 21:26:43 [debug] uPyEasy-uPyEasy: Plugins: Async processing plugins
2018-02-18 21:26:43 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: Test
2018-02-18 21:26:43 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: DS18B20
2018-02-18 21:26:43 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: BME280
2018-02-18 21:26:46 [debug] uPyEasy-uPyEasy: Scripts: Async processing scripts/rules
2018-02-18 21:27:43 [debug] uPyEasy-uPyEasy: Plugin: test process
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Plugin: ds18 process
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: Test
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Plugin: bme280 process
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP: send SENSOR_TYPE_TEMP_HUM_BARO
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP: SENSOR_TYPE_TEMP_HUM_BARO
2018-02-18 21:27:44 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP message: http://xxx.xxx.xxx.xxx:8080/json.htm?type=command&param=udevice&idx=351&nvalue=0&svalue=16.3844.64746;0;1023.3;0
2018-02-18 21:27:45 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP response: {
"status" : "OK",
"title" : "Update Device"
}

2018-02-18 21:27:45 [debug] uPyEasy-uPyEasy: Plugin: ds18 data read: 16.25
2018-02-18 21:27:45 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: DS18B20
2018-02-18 21:27:45 [debug] uPyEasy-uPyEasy: Plugins: Scheduling Async processing plugin: BME280
2018-02-18 21:27:46 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP
2018-02-18 21:27:46 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP: send SENSOR_TYPE_SINGLE
2018-02-18 21:27:46 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP: SENSOR_TYPE_SINGLE
2018-02-18 21:27:46 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP message: http://xxx.xxx.xxx.xxx:8080/json.htm?type=command&param=udevice&idx=158&nvalue=0&svalue=16.25;0
2018-02-18 21:27:46 [debug] uPyEasy-uPyEasy: Protocol Domoticz HTTP response: {
"status" : "OK",
"title" : "Update Device"
}

[berbergh]

[berbergh]

Although some contact seem to be there, no updat is done in Domoticz:

The Dallas device does deliver proper data:

[berbergh]

This is what I see in the domoticz log:
2018-02-20 20:21:00.187 Error: EventSystem: TEMP_HUM_BARO missing values : ID=351, sValue=17.6643.34668;0;1023.187;0