mainly questions/comments and maybe bug with dfu?

[realizedf]

couple things:

1. not sure if the video is current or not (since it shows flashing a .bin not .hex?) but i still can't successfully flash the super.hex file and have had problems flashing the bootloader/softdevice etc as well even though it says it uploaded - my blekey that i tested on is stuck in DFU mode now so i think documentation needs to be updated for the flashing via android instructions.

2. what awg cable is recommended for the punchdown block? ive tried many and ended up using stranded cable without the rubber and thats the only way i could punchdown secure enough to stay in place (pulled cable from an old cpu fan i think)

3. how do we know what version of the firmware is running on the BLEKEY?

4. is there any way to change the output/information from blekey.py? for example i think it collects more info and should be able to give more detailed information?
   i.e

   BLEKey/wiegand.c

   Line 204 in 891a0d8

   void wiegand_task(void)

5. is there any way to save card data on the blekey till manually removed as well ? think i noticed a bug if the data1/data2/and/or ground are not secure enough you can see the ble device but can't access ble characteristics (not sure exactly what causes this but i think one of the cables not being secure or shorted with another is the cause)

6. is 1.2 the most recent hw version? any plans for a newer ver?

thank you!